Holderchem supplied the Sukleen waste treatment facility with Batimix Epoxy Mortar 200 to treat a floor area, which needed to withstand heavy-truck and lifting-equipment traffic. Collection carts tipped their waste onto a concrete floor, and the flooring needed to withstand the mechanical loading shovels transfer of waste to the skips. The epoxy mortar exhibited high strength, low shrinkage, excellent adhesion to the concrete substrate, and high chemical and solvent resistance.
Statement of Responsibility: The information and application advice contained in this document are based on the present state of scientific and practical knowledge of Holderchem SAL. It is provided with no warranty, implied or otherwise, as to its completeness or accuracy. Since methods and conditions of application and use are beyond the control of Holderchem, HOLDERCHEM MAKES NO WARRANTIES, IMPLIED OR OTHERWISE, AS TO THE MERCHANTABILITY OR FITNESS FOR ORDINARY OR PARTICULAR PURPOSES OF ITS PRODUCTS AND EXCLUDES THE SAME. Holderchem warrants that its products shall be of sound materials and workmanship. As products are applied, handled and stored in manners and site conditions over which Holderchem has no control, Holderchem's liability in respect of any material which can be proven defective shall be limited to the replacement of such defective material or reimbursement of its cost at Holderchem's option. Holderchem shall not be liable for any consequential or incidental damage or loss arising out of the use of its products. Important Note: Holderchem shall have the right to modify product specification sheets at any time without previous notice. Buyers should always refer to the most recent data sheets, copies of which can be supplied upon request. The sale of products mentioned in this literature shall be subject to Holderchem's General Conditions of Sale Delivery and Payment.
Holderchem Marketing Support seeks to promote, market and sell solutions to architects, engineers, contractors, specialty applicators and building materials distributors to meet construction challenges, by bringing to market innovative products and systems, which offer benefits across the complete life cycle of buildings and other constructions. It also aims at ensuring the cement, paint, adhesive and other selected manufacturing industries achieve better productivity, by lowering overall costs, and extending products service life, performances and functionalities.