Batimix Epoxy 200 LV

Epoxy adhesive - High modulus - Low viscosity

Description

BATIMIX Epoxy 200 LV is a 100% reactive, two-component material designed as a moisture insensitive adhesive and binder for numerous application needs. This high modulus material is available in low viscosity (LV), medium viscosity (MV), or gel (GEL) consistencies.

BATIMIX Epoxy 200 LV provides a faster cure time for bonding concrete, at temperatures ranging from 1°C to 16°C.

Main Purpose

BATIMIX Epoxy 200 LV is a multi-purpose product. It is suitable for the following applications:

  • General adhesive
  • Primer and sealer
  • Bonding toppings
  • Production of repair mortars by mixing it with sand.

At temperatures exceeding 25°C, the medium viscosity product (MV) is more suitable for the applications listed herein. The product is not recommended for use as a surface sealer over new concrete, nor at substrate temperatures less than 0°C.

Features

BATIMIX Epoxy 200 LV exhibits the following characteristics:

  • High early strength at low temperatures
  • Excellent adhesion for bonding together concrete, steel, ceramic, or wood.
  • Forms a tough, wear and chemical resistant coating for industrial floor slabs
  • Easy-to-use mix ratios by volume
  • Designed for applications at temperatures of 4°C to 30°C
  • Working time and cure time will decrease as temperatures increase, and conversely increase as temperatures decrease

BATIMIX Epoxy 200 LV is mixed with sand or other aggregates. It is used to produce epoxy repair mortars and epoxy repair concrete. Mix the epoxy resin unit (part A) with the hardener unit (part B) before adding the aggregates. Trowel the mortar into place. If the surface is too rough, a topcoat of either BATIMIX Epoxy 200 LV or BATIMIX Epoxy 200 MV can be applied. It is not intended to be used as an aesthetic coating nor for overhead anchoring.

Dosage

The mix ratio of component A:B is 2:1 by volume.

Available Packages

  • Two components in metallic pails of 3.8 liters and 11.4 liters

Health and Safety

BATIMIX Epoxy 200 LV is a two-part system. It is packaged in 1 gallon (3.8 liters) and 3 gallons (11.4 liters) units. The mix ratio of components A to B is 2 to 1 by volume. Store indoors at temperatures ranging from 7⁰C to 30⁰C.

Get connected with us on social networks!

Holderchem

Holderchem is a main supplier of building materials and provider of solutions to the construction industry. Its building chemicals division is actively involved in the manufacture and distribution of construction chemicals, drymix mortars, tile adhesives and grouts, waterproofing and protective coatings, architectural paints, flooring products, acoustic systems, structural and decorative façade systems. It also supplies the cement, paint, and construction industries with specialty chemicals.

Library
Brands Supplied
Useful Links
Contact
Copyright Notice

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Some references may appear on this website or product descriptions to trademarks belonging to others not affiliated with Holderchem SAL (or Affiliate), including references which may not display the ® symbol. Elkem and the Elkem logo are registered trademarks of Elkem ASA - Novacolor and the Novacolor logo are registered trademarks of San Marco Group S.p.A. - Sto and Sto logo are registered trademarks of Sto SE & Co. KGaA - Reckli and Reckli logo are registered trademarks of Reckli GmbH - Vandex is registered trademarks of RPM Belgium NV. All references to other trademarks belonging to third parties or referring to branded instruments that appear on this website, shall be understood to refer to those registered trademarks owned by others, and not to any trademark belonging to Holderchem SAL.

©2024 Holderchem, developed with by Novium